Working time = 1210Wh * 0.9 / device's operating power
For example: assuming the device's power consumption is 300W, the working time is 518Wh * 0.9 / 300w = 1.56 hours (approximately)
- FEATURES
- TECH SPECS
- FAQs
- REVIEW
The portable power station has 4 AC pure sine wave output port, 1 DC output port, 3 USB-A port, 1 TYPE-C port, can be supplied to 9 devices at the same time. Each part is equipped with a separate switch, energy saving and safety.
The lifepo4 power station has 3charging ways, can be charged by AC adapter, car charger, solar panel (MPPT technology).Whether you are at home, on the road, or in the field, there is always a way to charge the power station and power your life.
The lifepo4 power station has 3charging ways, can be charged by AC adapter, car charger, solar panel (MPPT technology).Whether you are at home, on the road, or in the field, there is always a way to charge the power station and power your life.
Friendly low-current mode design, even if the power is only 15W equipment can be used properly. Suitable for camping, travel, outdoor adventure, emergency, rescue and relief and many other scenarios, it is a good helper for life.
LiFePO4 Batteries
Compared with lithium ion batteries, LiFePO4 batteries have the charateristics of smaller volume, higher cycle times and safer product use.
60W PD
Charge macbook 4 times faster- The 60W PD full fast charging solution, which can charge most fast charging notebooks, gaming laptops, game consoles, and mobile phones within 60 watts.
We recommend that you use a 100W or 120W solar panel to charge the LiFePO4 portable power station.
Recommend 18V⎓3A 60W, open circuit voltage should be below 28V.
GO Green, VIEW MORE...
Specifications
Battery Info:
capacity:
1210Wh
Type:
LiFePO4(Lithium Iron Phosphate)
Life Cycles:
3500+Life Cycles
Shelf-life:
Recharge to 80% Every 3 Months
Management System:
MPPT Controller, BMS
OUTPUT:
AC Outlets:
2 x 110V /10.9A 200W
Inverter Type:
Pure Sine Wave
Surge Power:
1700W
USB-C Port:
1x60W
USB-A Port:
3 x 3.5V/2.4A(MAX 25W)
DC Outlets:
1 x 12V/10A (Car Outlet)
INPUT:
AC Charging Cable:
216W
Solar Input:
15-24V/8Amax (Recommend 18V 200W)
Car Input:
12V from Cigarette Lighter Port
RECHARGE TIMES:
AC Charging Cable:
≈6.6 Hrs
Solar (200W):
≈7 Hrs
Car Charging:
≈11.8 Hrs
GENERAL:
Pass through Charging:
YES(accept AC output)
Weight:
16.2KG
Dimensions:
40*21*29CM
Charging Temperature:
32-104°F (0-40°C)
Operating Temperature:
14-104℉ (-10-40℃)
Storage Temperature:
14-104℉ (-10-40℃)
Certifications:
RoHS、FCC、UL2743、UN38.3
Warranty:
12 Months
Frequently Asked Questions
Still have questions? Send us your question by filling out the form below, we will be happy to assist you.
How do I calculate the up time of my device?
How do I use the AC output?
Press the power button 3 seconds to turn the unit on. Short press the AC button, the LCD screen will light up with AC indication, you can use the AC outlet, press the AC button again to exit the AC output.
How often do I need to charge the GT1500?
CTECHi LiFePO4 portable power can retain more than 50% of its remaining power when fully charged, even after twelve months of non-use.
However, for the life of the product, we recommend charging the device every 3 months even when you are not using it.
Tips: When the product is drained, it needs to be charged with the wall charger.
Can it charge and discharge at the same time?
Yes, (Except for AC charging).
What is the maximum input charging power of the GT1500
AC Charging Cable: 216W
What kind of solar panels should I choose for GT1500
15-24V/8Amax (Recommend 18V 200W)
